OEM / ODM PROGRAM - FOSHAN, CHINA

Your Brand.
Our Precision.

OEM dental handpieces built to defend your brand — machined by audited partner CNC centres, assembled and 100% inspected in-house in Foshan. Pilot from 50 units.
Every unit is 100% inspected — speed, noise, air tightness, runout — before it leaves our floor.

50

Units pilot MOQ

7–10

Days sampling

100%

Final inspection rate

2 yrs

Spare parts hold
How We Build

Every unit passes
the same four gates.

Nothing skips a gate, whatever the order size. Design, assembly, calibration, inspection and release all happen under one roof — and one accountable name.
Gate 1 · Incoming

Parts inspection

Every component lot checked against drawing — tolerance ≤ 0.01 mm — before it enters assembly
Gate 2 · In-house

Parts inspection

Every component lot checked against drawing — tolerance ≤ 0.01 mm — before it enters assembly
Gate 3 · Final

Parts inspection

Every component lot checked against drawing — tolerance ≤ 0.01 mm — before it enters assembly
Gate 4 is yours: batch QC records travel with every shipment, so you can re-verify on your own bench.

What this means for your brand

One accountable answer from drawing to serial number
Spec changes validated on samples, not argued in a chain
Small batches inspected to the same standard as volume runs
Every critical part has a qualified second source
Source Verification

Verify us in 20 minutes, not 20 emails

The three things a procurement manager actually checks before shortlisting a supplier. We keep them ready instead of sending a brand film.

Production walkthrough

A 3–5 minute unedited recording: parts inspection, our assembly bench, and the inspection process each unit goes through. Until it is ready, we run it live on a video call — which is harder to fake anyway.

QC records, per batch

Every shipment carries an inspection report by serial number: speed, noise, air tightness and runout — with the pass criteria written down before production starts, not negotiated after a complaint.

The 20-minute remote audit

Book a screen share. We will open the assembly line, the inspection bench and the spare parts shelf — live, unscripted, camera on our side. Bring your checklist.
Live assembly and calibration line walkthrough
Serial-number traceability demo, end to end
ISO 13485 certificate scan and scope explanation
Incoming inspection records for the lot your order would use
Spare parts shelf: what is stocked, what is 15 days out
48-hour bench test protocol for your samples

Two ways to see it

No brand film. No music. Just the floor.
Dealer Launch Toolkit

Give your dealers the material to sell it —
before you place the order

Your reps' real problem is not the price list. It is explaining to a clinic why it should replace the brand it already uses. These tools do that translation for them — download them, put your logo on them, use them.
PDF · 4 pages

OEM Starter Pack

File pack checklist: what you send, what we send back
Coupling confirmation steps, in writing
MOQ, sampling and lead times
Spare parts and design-protection commitments
XLSX · with formulas

Clinic TCO Calculator

3-year cost: steel vs ceramic bearing handpieces
Includes sterilization-driven replacement cycles
Chair downtime cost — usually the biggest line
Editable: the clinic fills its own numbers
XLSX · template

Sterilization Cycle Record

200-cycle autoclave test log for your sample units
Pass/fail criteria for speed, noise, air tightness
Auto-summary sheet — send it back as feedback
Your data becomes a co-branded case study
PDF · 2 pages

Ti Series Spec Sheet

Full parameters for tenders and registration files
High-speed and low-speed ranges
OEM configuration options listed
Indicative values marked, final values locked per order
Request Early Access
PPT · editable

Clinic Training Deck

Slides your reps can present chair-side
Why-switch storyline with real cases
Space for your own logo and pricing
ZIP · assets

Marketing Asset Pack

Product photography, white-background and lifestyle
Social media post templates
Print-ready brochure with your branding
Everything in this toolkit is free, watermark-free and yours to rebrand. If a tool is missing for your market, tell us — we build it with you.
OEM Terms

What you need to know before ordering


Indicative terms. Final values confirmed per project in the quotation.
Pilot MOQ
50 units per model; 200–500 units for full custom packaging
Sampling
7–10 working days after artwork approval; 2–3 units, cost deductible from the first bulk order
Mass production
25–35 working days after sample approval and deposit
Tooling
Logo plate and packaging die-cut, one-off, quoted separately, owned by you
Logo methods
Laser engraving (handle), pad printing (Packaging)
Body finishes
Anodized colors (black, grey, gold, blue, custom Pantone), matte or polished
Packaging
Retail box / EVA case / aluminium case / custom insert / multilingual manual
Spare parts
Cartridges, turbines, LED modules and seals held 2 years after last production run
Warranty
12 months; DOA units replaced in the next shipment
Exclusivity
Available per country against an agreed annual volume — agreed before the first order
How It Works

From brief to repeat order, with evidence at every step

Five steps. Each one ends with something written, not promised.
1

Brief & Fit Check

Model, market, coupling and volume. We tell you within 48 h if we are the right source.
You get: fit-check reply, NDA if needed.
2

Quote & Spec Lock

Model, market, coupling and volume. We tell you within 48 h if we are the right source.
You get: fit-check reply, NDA if needed.
3

Paid Sample + Test Kit

2–3 units shipped with the sterilization record and TCO calculator for your bench test.
You get: samples + test protocol + layout proof.
4

Pilot Batch 50–200

Production run with packaging proof approval, weekly progress photos, batch inspection report.
You get: inspection report by serial number.
5

Repeat & Support

Reorder schedule, spare parts stock, dealer training material updates for your market.
You get: spare parts plan + updated toolkit.
Honest Comparison

FOVO, a trading company, or a large factory

Every sourcing option has a trade-off. Here is ours, next to the alternatives.

FOVO OEM
Trading company
Very large factory
How parts are made & controlled
✓
Built to FOVO specification; 100% incoming inspection before assembly
✗
Subcontractor chain, often undisclosed
⚠
Fully in-house — fixed machine cost sits in your unit price
Who owns quality decisions
✓
FOVO: assembly, calibration, 100% final inspection in-house
✗
Depends on the factory behind them that quarter
⚠
Factory QC dept; you are one line among many
Pilot batch
✓
50 units
⚠
Whatever the underlying factory accepts
✗
Typically 500–1,000 units minimum
Spec change mid-program
✓
Drawing-level change, validated on samples in ~2 weeks
⚠
Depends on the factory behind them
✗
Formal ECO process, often 6–10 weeks
Who answers after-sales
✓
The person who signed your PO
✗
Varies by shipment and by factory
⚠
A ticket in a queue
FAQ

Questions OEM partners actually ask

Machining is executed to FOVO drawings and specification, and every incoming lot passes 100% inspection against those drawings before it enters assembly. Design, assembly, calibration, final inspection, packaging and after-sales all happen in our own facility — so from drawing to serial number there is one accountable name: ours. You can audit our assembly and inspection floor on a live video call before any order, and batch QC records travel with every shipment.
Yes. The pilot run is 50 units per model . It is deliberately small: prove the product and the process on your market before you commit to custom packaging volumes.
We confirm our certification status for your target market in writing before any order, and we supply the technical file, test reports and labelling support needed for your own registration. We do not claim certificates we do not hold — ask and you will get a straight answer. [确认实际持证情况]
Vector files (AI, EPS or SVG) give the cleanest engraving result. You will receive a layout proof for written approval before anything is produced.
Send a sample or a specification sheet. We review the structure, confirm the coupling, and tell you which parts can be matched or improved — including the light-contact pin, which is where most "compatible" handpieces quietly fail.
DOA units are replaced in your next shipment. The 12-month warranty covers manufacturing defects [待确认], and spare parts are held for 7 years so your service center is never waiting on a discontinued cartridge.
No. Your artwork, tooling and packaging die-cut are used only for your orders. We do not list your model in our catalogue, and we will not ship our own brand into a market where you hold exclusivity.
Yes — or start with the 20-minute live video audit: assembly line, inspection bench and spare parts shelf, unscripted. Most partners do the video call first and visit Foshan before the pilot order.
Start Your Project

Tell us what you want to build

Send the brief and you will get a quotation, a sampling plan and a coupling confirmation within three working days — or a clear no if the project is not a fit.
Blank Form (#4)

We reply within 24 hours on business days.
© 2026 FOVO Dental. All rights reserved.
starfile-emptyscreenchevron-down linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram